Compatible Video Formats
The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts
to the incoming signal. It can receive these formats as composite video, S-video, or component video—
which it accepts through the Video, S-Video, and Input A ports, respectively.
The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital
video is accepted by the HDMI port and the Input A port (in component video format). The Input B
port accepts analog RGB computer monitor signals.
If necessary, you can select a different Aspect setting to optimize the image. The resolution at which the
image displays for a given setting depends on the currently active picture source, as listed in the
following tables.
Composite video or S-Video
Format
NTSC
PAL or SECAM
Component video
Aspect setting
Format/
Signal
Normal
SDTV
(4:3)
480i
960 × 720
576i
960 × 720
480p
960 × 720
576p
960 × 720
HDTV
(16:9)
720p
1280 × 720
1080i
1280 × 720
Note: The signal name refers to the total number of visible scan lines and the display mode
(interlaced or progressive), as defined by the signal format.
Aspect setting
Normal
Zoom
(4:3)
(16:9)
960 × 720
1280 × 720
960 × 720
1280 × 720
Zoom
Squeeze
(16:9)
(16:9)
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
—
—
—
—
Squeeze/
Wide
Through
(16:9)
(4:3)
1280 × 720
596 × 446
1280 × 720
708 × 528
Wide
Through
(16:9)
(4:3)
1280 × 760
596 × 446
1280 × 760
708 × 528
1280 × 760
596 × 446
1280 × 760
708 × 528
(16:9)
—
1176 × 664
—
—
Squeeze
Through
(16:9)
794 × 446
944 × 528
Squeeze
Through
(16:9)
794 × 446
944 × 528
794 × 446
944 × 528
—
—
63
Specifications