Turning The Camera On And Off; Saving Power With Auto Shut-Off; Using The Easytouch Control Panel - Epson Digitial Camera User Manual

Turning the Camera On and Off

To turn the camera on, simply slide the power switch to the ON position.
The lens cover opens and the control panel on the top of the camera
lights up. The green standby light on the back of the camera flashes for a
few seconds. When it stops flashing and stays fully lit, the camera is
ready to take pictures.
shutter button
green standby
light
power switch
Slide the power switch to the OFF position to turn off the camera. The
lens cover closes and the control panel turns off.
2-2
Taking Pictures with PhotoPC

Saving Power with Auto Shut-off

If you wait more than 60 seconds before taking a picture, the camera
turns off automatically to save battery power. To turn the camera back
on, slide the power switch OFF, and then ON. Or press the shutter
button. You will have to press the shutter button again to take a picture.
If you want, you can change the 60-second time period for auto shut-off.
For more information, see page 5-3.
control panel

Using the EasyTouch Control Panel

The control panel keeps track of how many pictures you've taken and
gives you important information about the status of your battery and the
settings you're using.
resolution mode
pictures remaining
timer
pictures taken
AUTO
battery level
TITLE
Cam2-03.eps
EPSON AMERICA, INC.
DATE
Documentation Department
6/26/95
20770 Madrona Avenue, Torrance, CA 90503
(310) 782-0770 DRAWN BY
erase last picture
flash mode