Stopping A Command Or Program - Epson ActionNote User Manual

Press
off. When you
numeric character instead of the letter. You can press
plus the key to enter the alphabetic character on the key; press
uppercase.
When Num Lock is off, you can generate the numeric character
by pressing

Stopping a Command or Program

You may sometimes need to stop a co mmand or program while
it is running. Many programs provide a command you can use
to cancel or even undo an operation. If you have entered an
MS-DOS command that you want to stop, try one of the
following commands:
Hold down
Hold down
These methods may also work in your application program. If
not, you may need to reset the computer, as described below.
Caution
It is best not to turn off the computer to stop a program or
command. If you have created new data and have not yet
stored it, it will be erased if you turn off the computer.
3-8 Using Your Computer
to turn Num Lock (and its indicator light) on and
press the key in Num Lock mode, you enter the
plus the key to enter the alphabetic character in
and press
and press
plus the key.