Windows System Requirements - Epson EpsonNet 802.11b User Manual

Windows System Requirements

For printing with the EpsonNet 802.11b Wireless Print Server, make sure
each computer meets the following requirements:
A Microsoft
processor or later, 200 MHz or faster recommended
Windows 95, Windows 98, Windows Me, Windows NT
2000, or Windows XP
32MB of RAM (64MB recommended)
100MB of free hard disk space (200MB or more recommended)
VGA or better display adapter and monitor
CD-ROM or DVD drive for installing the printer software
In addition, each computer needs to be connected to an existing wired
network that has a wireless access point, or needs to have a wireless adapter
installed.
An access point may be combined with a hub or router or may be a
separate unit. For a current list of supported access points, see EPSON's
web site at: http://support.epson.com.
Wireless adapters can be installed in a PCMCIA slot on a laptop, a PCI
slot in a desktop computer, or connected through a USB port.
Make sure your wireless adapters(s) work in ad hoc mode if you want to
print without an access point. For a list of supported adapters, see
EPSON's web site at: http://support.epson.com.
To connect the print server to your printer, you also need a high-speed,
bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long) with a
D-SUB, 21-pin, male connector for the print server and a 36-pin
®
Centronics compatible connector for your printer.
®
Windows compatible PC or laptop with a Pentium
4
®
®
4.0, Windows