Setup Procedure - NEC NP-UM330W Installation Manual

Setup Procedure

Setup Flow
1. Mount the sensor unit to the projector.
2. Connect the projector to the computer.
3. Turn on the projector power and adjust the position and focus of the projected
image.
4. Load the AAA battery in the stylus pen.
5. Connect the computer and sensor unit with the included USB cable.
6. Use the included CD-ROM to install the application onto the computer.
7. Launch the software and perform calibration.
1. Mount the sensor unit onto the projector.
1. Open the screw cover at the center of the sensor unit.
2. Attach the sensor unit to the two nooks in the screen side surface of the projector.
ENG-8