NEC NP-UM330W Installation Manual page 12

2. Connect the projector to the computer.
The projector can be connected to a computer using the computer cable (supplied with the projec-
tor) or a commercially available HDMI cable.
3. Turn on the projector power and adjust the position and
focus of the projected image.
For the adjustment procedure, see the projector user's manual.
4. Load the AAA battery in the stylus pen.
Loading the battery
1. Turn the battery cap counterclockwise and remove it.
2. Insert the negative side of the battery (AAA) into the battery cap.
Battery cap
ENG-10