Printing
The font selected by the control panel does not print.
l
Your software may be overriding your panel setting. Check
the font setting in your application program.
The wrong characters are printed.
l
The wrong character table or the wrong international
character set may be selected. Check the DIP-switch
settings. See page
The print position is not what you expected.
Printing starts too high or too low on the page.
l
Adjust the top margin set by your application software.
Use Micro-feed to adjust the print position.
All the text is printed on the same line.
l
Set DIP switch
adds a line-feed code to each carriage return.
Two line-feed signals are being sent. Set DIP switch
off.
The page length does not match the length of your
l
continuous paper.
Change the page-length setting with DIP switches
See page
2-2.
Check the page length set by your application software and
adjust it if necessary.
Troubleshooting
6-6
3-8.
on so that the printer automatically
2-4
3-8.
2-4
and
2-1