PAUSE
The
l
it stops printing abruptly.
The print head is overheated. Wait a few minutes; the
printer resumes printing automatically when the print head
cools.
The print is faint or uneven.
Printed characters have parts missing at the bottom.
l
The ribbon cartridge may not be installed properly. See the
section on ribbon installation in Chapter
The printout is faint.
l
The ribbon may be worn out. Replace the ribbon cartridge.
Check that the paper-thickness lever is set correctly for the
paper you are using.
Dots are missing in the printed characters or graphics.
A line of dots is missing
l
The print head is damaged. Stop printing and have your
dealer or a qualified service person to replace the print head.
Dots are missing in random positions.
l
There is either slack in the ribbon or the ribbon has come
loose. Reinstall the ribbon cartridge.
Printed characters are not what you expected.
The typestyle or characters that are set by your software
l
cannot be printed.
Check that the software is correctly installed for your
printer.
light is flickering and printer does not print or
in
the printout.
Troubleshooting 6-5
Printing
1.