Automatic Answer - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
5. Press any additional ADL keys
that are programmed with the
remaining digits needed to
place the call.
. . . or . . .
Dial any remaining call digits.
Any additional ADL keys must be pressed before the digit sequence
assigned to the first ADL key has been completely dialed, or before a
timeout occurs. Once a number has been dialed completely and a
connection is made, any additional ADL keys that are pressed will be
ignored by the system (see Note 1).
Display telephones will display the digits associated with each Autodial
sequence.
The call will now be treated as a normal call.
NOTES:
1. Up to 24 digits can be programmed on each ADL key. Available digits
include 0 ~ 9, , and #. Special functions are available to signify dial
*
tone, pauses, and the end of dialing. Enter
a pause of n length (e.g.,
16-second pause); and # to signify the end of dialing.
2. The system does not check the validity of the digits that are
programmed onto an ADL key. If a key has been incorrectly
programmed, you will receive reorder tone when attempting to place
a call via the key.
3. If there is no line selection programmed into the Autodial sequence
associated with the pressed ADL key, a line will be automatically
selected, based on your telephone's line preference type. If you
manually select a line, this will override any line selection that is
programmed onto an ADL key.
4. An Autodial key can be used when your telephone is either idle or
holding a call on "soft hold." When your telephone is in a talking
state, pressing an ADL key will be ignored by the system.

AUTOMATIC ANSWER

By activating the Automatic Answer feature, you can answer internal calls
or intercom calls through the telephone speaker, without having to press
a line appearance key or activate the telephone's speaker and
microphone. Automatic Answer is activated through the use of a
programmed Automatic Answer access key and applies to your
telephone's prime line, as well as to any intercom lines on your
telephone. If your telephone has an assigned ACD line key, Automatic
Answer will also apply to any internal or external calls to this line.
FEATURE OPERATION
for dial tone;
* *
6 = a 6-second pause and
*
n for
*
9 7 = a
* *
4-7