Optical Parts - Toshiba TOSLINE-S20 Instruction Manual

9.3

Optical parts

(1) Optical fiber cable
For the optical parts of FC Type, refer to the "T2/T3 stations of the instruction manual
(6F3B0354)". The following is the description on optical parts of F07 Type.
As the optical fiber cable, use H-PCF (Hard Plastic Clad silica glass optical Fiber) cable
that satisfies the following-given requirements.
Environmental condition
Temperature
Humidity
Cable characteristics
Allowable tension
(max.)
Allowable bending
radius (min.)
Outer diameter
Weight
We recommend the use of a short wave service H-PCF cable that is described below.
Manufacturer: Sumitomo Electric Industries, Ltd.
Agency: Takachiho Electric Co., Ltd.
Product identification: 2001H - MM - ¨¨ / ¨¨¨¨ 2 - C - LAP 2XCCV - HC - 20/07
Optical fiber core wire
20 C to +70
Core
95%RH (60 C)
Clad
Housing
not more than
Nominal NA
75 kg
not less than
Wavelength
50 mm
10.0 1.0mm Transmission loss (max.)
Transmission band width
100kg/Km
(max.)
Table 9.1 Characteristics of optical fiber cable
Connector
Both sides "male"
Outer diameter
Material
Outer diameter
Material
Outer diameter
Material
Product name
Cable total length (m)
Cord exposure length (m)
28
200 5 m
Silica glass
230 (+0, 10) m
Fluoroacrylate resin
500 100 m
Fluororesin
0.40
810nm
7.0dB/Km
14MHz Km
Size
ASC25 Instruction Manual