Epson Stylus Color 900N User Manual page 47

Follow these steps to assign an IP address:
1. Make sure Windows is running, the Ethernet card is connected to the network,
and the printer is turned on.
2. Click
Start
.
Net!2
3. Click the printer where you want to set the IP address, and then click the
Configuration
40
, point to
Programs
button.
If you have connected more than one printer with the same
type of Ethernet card to the network, you can distinguish the
cards by their MAC addresses. Press and hold the card's
status sheet button for three seconds to print a status sheet
with the MAC address of the card.
, point to
EPSON Net!2
, then click
EPSON
click here