Sony DAV-FX10 Operating Instructions Manual page 44

6
The defauh setting is underlined.
• _: plays both the JPEG image files
and MP3 audio tracks in the same album
as a slide show.
• [AUDIO (MP3)]: plays only MP3 audio
tracks continnously.
• [IMAGE (JPEG)]: plays only JPEG
image files as a slide show.
Press MENU.
The list of albums recorded on the DATA
CD appears.
7
Press .I'/4, to select the album you want
and press E:>.
The system starts playing _e selected
album.
You can turn the album list on and offby
pressing MENU repeatedly.
• You can also change tile slide show &uation
(page 44) and effect (page 45) while playing JPEG
image files
• If you want to play a slide show to the same audio
tlack, set tile track to Repeat Play (page 35).
• V_qlen you select [AUTO], the system can recognize
up to 300 MP3 tracks and 300 JPEG files in a single
album. When you select [AUDIO (MP3)] or [IMAGE
(JPEG)], file system can recognize up to 600 MP3 and
600 JPEG files in a single album A maximum of 200
albmns can be recognized regardless of the selected
mode
• You cannot playback JPEG files and MP3 tracks at
the same time if they are not contained in the same
albmn.
• Wllen the JPEG image file's playback duration is
longer than the MP3 audio track, the image slide
show coiltinues witholg sound
• When the MP3 audio track is longer than the JPEG
image file's pla_Pack dmation, the audio track
contimles with no slide show
• If there are no MP3 audio tracks and JPEG image
files in the DATA CD, the [No audio data] and [No
image data] messages appear on the screen
• If you set [MODE (MP3, JPEG)] to [IMAGE
(JPEG)] on a disc that contains MP3 tracks only or
[AUDIO (MP3)] on a disc that contains JPEG files
only, you may not able to change the [MODE (MP3,
JPEG)] setting.
• PICTURE NAVI does not wolk when [AUDIO
(MP3)] is selected
• If you play large MP3 track data and JPEG image
da_a a_ the same time, the soimd may skip. It is
recommended that you set the MP3 bit rate to 128
kbps or lower when creating the file. If the SOllnd still
skips, then redilce the size of the JPEG file.
Specifying the slide show
duration
(JPEG only)
When you play JPEG image files using slide
show, you can speciI}- the duration for slides to
appear on the screen.
1
Press Q DISPLAY twice.
The (ontrol Menu for JPEG appears.
2
Press t'/4, to select
[INTERVAL], then press ENTER.
The options for [INTERVAL] appear.
Press q,/4, to select the setting you
want,
The default setting is underlined.
• INORMAL_: sets the dnration to about 6
to 9 seconds. (hnages that are tour million
pixels or more will lengthen the duration.)
• [FAST]: sets the duration shorter than
[NORMAL].
• [SLOW1]: Sets the duration longer than
[NORMAL].
• [SLOW2]: Sets the duration longer than
[SLOWI].
4
Press ENTER.
The selected setting takes effect.
• Some JPEG files may take longer to display than
others, which may make the clumtion seems longer
that the option you selected. Especially progressive
JPEG files or JPEG files of 3,000,000 pixels or more.
44us