Table of Contents
Advertisement
Manual
tuning
preset
You can manually
tune in and store the radio
frequency of the desired stations.
1
Press TUNER/BAND
repeatedly to
select FM or AM.
2
Press PLAY MODE/TUNING
MODE
repeatedly
until "AUTO"
and
"PRESET"
disappear from the display.
3
Press TUNING +/- repeatedly to tune in
the desired station.
4
Press TUNER MEMORY on the remote.
The preset number flashes. Station storage
staris with preset number
1. If preset
stations have been erased, then stations are
stored to the lowest preset number
containing
no station.
5
Repeat steps 1 through 4 to preset
other stations.
Other
Operations
TO
Do this
Tune in a s_a_ion
Follow the
procedure
described
wi_h a weak signal
in "Manual tuning preset"
(page%
Erase a preset
Seleo the preset number of the
station
stalion to be erased, and then
press CLEAR on the remote
twice.
To change
the
AM tuning
interval
(except
for
European
and
Middle
Eastern
models)
The AM tuning interval is faoory-preset
to 9
kHz (or 10 kltz lbr some areas). To change 1he
AM tuning interval, tune in any AM station first.
While holding TUNERfBAND,
press I/Q).
When you change the interval, all 1he AM;FM
preset stations are erased. To reset the interval,
rune in any AM station first. While holding
TUNER;BAND,
press I/Q).
Tips
• The preset stations are retained for halfa day even if
you disconnect the power cord or if a power Pailure
occtlrS.
• TOimprove the reception, adjust the supplied
antellnas
or connect
an exlerna]
antenna.
You can listen to a radio station eifl_er by
selecting a preset station, or by manually
tuning
in the station.
Use butlons
on the unit for the operation.
Listening
to a preset
station
::"
Preset Tuning
Preset radio stations in fl_e taner's memory
first
(see "Presetting
radio stations" on page 8).
1
Press TUNER/BAND.
2
Press PLAY MODE/TUNING
MODE
repeatedly until "PRESET"
appears in
the display.
3
Press PRESET +/- on the remote
repeatedly to select the desired preset
station (or RDS station name*).
* European model only
Listening
to non-preset
radio
station
Manual
Tuning
1
PressTUNER/BAND
repeatedly to
select FM or AM.
2
Press PLAY MODE/TUNING
MODE
repeatedly until "AUTO"
and
"PRESET"
disappear from the display.
3
Press TUNING +/- repeatedly to tune in
the desired station.
continued
9Gt_
Advertisement
Table of Contents
