Sony DSS SAT-A1 Operating Instructions Manual page 20

Home Entertainment System
(Hi-Fi TV, Hi-Fi VCR,
Audio/Video
Receiver)
>_;;/;_ _ t_1_ label t/tis jack RF IN,
i;zstead of VHF/UHF IN.
Refer to the illustration on the opposite page.
1 Connect the RG-6 cable from the satellite antenna's LNB to the DSS
receiver's SATELLITE IN jack.
2 Connect the DSS receiver's A/V jacks to the VCR and A/V
receiver's A/V IN jacks.
3 Connect the VCR's A/V OUT jacks to one set of the A/V receiver's
A/V IN jacks.
4 Connect the A/V receiver's MONITOR OUT jack to the TV's
VIDEO IN jack.
5 Connect one end of the telephone line cord to the DSS receiver's
TEL LINE jack. Connect the other end to your home's modular
telephone outlet.
6 Connect one end of the AC power cord to the DSS receiver's AC IN
jack. Connect the plug end to an AC outlet.
Optional Connections
If you have a cable input, cable box, or a terrestrial TV antenna,
connect it the VCR's VHF/UHF IN jack.
Best Connection: If your TV has an S-VIDEO jack, use an S-VIDEO
cable to connect the DSS receiver's S-VIDEO jack to the TV's
S-VIDEO IN jack. This provides the best picture quality. Then use
audio cables to connect one set of the DSS receiver's audio jacks to
the A/V receiver's AUDIO IN jacks.
Note
In this configuration, the A/V receiver must be turned on in order to pass tile
video signals through to your TV. When watching a program that is protected
by Macrovision, turn the VCR off to ensure a quality picture.
ZU
{2hupteh
._: Lonnecting Your System