Installing An Optional Interface Card - Epson FX-1180+ User Manual

Installing an optional interface card

You can use optional interface cards to supplement your
printer's built-in parallel interface. The EPSON interface cards
below are compatible with your printer. (Not all interfaces are
available worldwide.)
Model number
C82305✽ / C82306✽
C82307✽ / C82308✽
C82313✽
C82314✽
C82315✽
C82345✽
C82363**/C82364
C82362
C82384
* The last digit varies by country.
** When using an optional interface adapter (C82525).
Follow these steps to install an optional interface card:
1. Make sure the printer is turned off. Unplug the printer's
power cord and disconnect the interface cable.
2. Remove the screws securing the shield plate to the back of
the printer and remove the plate.
1-10
Setting Up the Printer
Card type
Serial interface
32 KB intelligent serial interface
32 KB IEEE-488 interface
Coax interface
Twinax interface
IEEE-1284 parallel interface
EpsonNet 10/100 Base Tx Int. Print Server
EpsonNet 10 Base 2/T Int. Print Server
EpsonNet 10/100 Base TX Int. Print Server