Overview Of Publishing Mode - Epson PP-100 User Manual

❏ The product may not be recognized by the computer when turning the power back on while fan
is operating. In this case, disconnect the USB cable and connect it again.

Overview of publishing mode

To write data to CDs/DVDs and to print labels that you created/edited are called "Publish"
in EPSON Total Disc Maker. The product has three kinds of publishing modes.
Standard Mode
This mode uses Stacker 1 as the input source, and Stacker 2 or 4 as the output source.
When Stacker 2 is selected as the output source, up to 50 CDs/DVDs can be created at
once. Also, if you refill discs to the input stacker and take out published discs from the
output stacker at the same time, up to 1000 CDs/DVDs can be published in a single job.
If Stacker 4 is selected as output source, discs can be removed without stopping the
product while running a job.
Note:
This mode does not use Stacker 3.
& See "Standard Mode" on page 22.
External Output Mode
This mode uses Stacker 1 and 2 as the input sources, and Stacker 4 as the output source.
Different types of discs (CD and DVD) can be loaded into each of the 2 stackers and can
create different types of discs. This is ideal for creating small batches of discs at once.
If Auto is selected for Input Stacker setting, up to 100 CDs/DVDs can be created at once.
If a setting other than Auto is selected, up to 50 CDs/DVDs can be created at once.
Since discs are ejected to Stacker 4, discs can be removed without stopping the product
while running a job.
Note:
This mode does not use Stacker 3.
& See "External Output Mode" on page 30.
Batch Mode
This mode uses Stacker 1 and 2 as the input source, and Stacker 2 and 3 as the output
sources.
New :Only for model with this feature
18
Publishing Discs