Epson PP-100 User Manual page 68

Lights
Power Busy Error Ink Stacker
1 2 3 4
Conditions/Remedies
Disc transfer error
Turn off the product and remove the disc. If
the same error occurs frequently, contact
your dealer.
Arm failed to release disc
Turn off the product and remove disc.
Do not remove disc from the arm by hand if
arm is picking up the disc. This may damage
the arm. If removing disc from the arm, turn
on the product again and let initializing
process remove the disc. To remove the disc
from the arm, turn on the product again and
let initializing process remove the disc.
If the same error occurs frequently, contact
your dealer.
Internal error
Turn off the product and check inside for any
objects, then turn on the product again.
If the same error occurs frequently, contact
your dealer.
❏ Do not remove disc from the arm by
hand if arm is picking up the disc. This
may damage the arm. To remove the
disc from the arm, turn on the product
again and let initializing process remove
the disc.
❏ If resuming label printing after the error,
run Nozzle Check and confirm the
condition of the print head.
❏ If the publishing does not start, check if a
print job remains in the print spooler and
delete all print jobs.
68
Troubleshooting