Brother MFC-9130CW Network User's Manual page 13
Multi-protocol on-board ethernet multi-function print serever and wireless multi-function print server
Hide thumbs
Also See for MFC-9130CW:
- Service manual (429 pages) ,
- Basic user's manual (226 pages) ,
- Advanced user's manual (100 pages)
Table of Contents
Advertisement
Changing your machine's network settings
c
Double-click the unconfigured device.
®
Windows
NOTE
• If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the Node Name and MAC Address (Ethernet Address) by printing the Network Configuration
Report (See Printing the Network Configuration Report on page 48 ). You can also find the Node Name
and MAC Address from the control panel. (See Chapter 4: Control panel setup.)
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) for
your machine.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother machine in the device list.
Macintosh
Macintosh
2
7
Hide quick links:
Advertisement
Table of Contents
