Table of Contents
Advertisement
RULES FOR SAFE OPERATION
(Continued)
22.
OUTDOOR
USE EXTENSION
CORDS. When tool
is used outdoors, use only extension cords suitable
32.
for use outdoors.
Outdoor approved
cords are
marked with the suffix W-A, for example - SJTW-A
or SJOW-A.
33.
23.
KEEP
cu'n'ERS
CLEAN
AND SHARP.
Sharp
cutters minimize stalling and kickback.
24.
KEEP HANDS
AWAY
FROM CUTTING
AREA.
Keep hands away from
cutters.
Do not reach
underneath
work while cutter is rotating. Do not
attempt to remove material while cutter is rotating.
25.
NEVER USE IN AN EXPLOSIVE
ATMOSPHERE.
Normal sparking of th_ motor could ignite fumes.
26.
INSPECT
TOOL
CORDS
PERIODICALLY
and
if damaged,
have repaired at your nearest Sears
Repair
Center.
Stay constantly
aware
of cord
location.
27.
INSPECT
EXTENSION
CORDS
PERIODI-
CALLY
and replace if damaged.
28.
KEEP
HANDLES
DRY,
CLEAN,
AND
FREE
FROM
OIL AND GREASE.
Always use a clean
cloth when
cleaning.
Never
use brake
fluids,
gasoline, petroleum-based
products or any strong
solvents to clean your tool.
29.
STAY
ALERT.
Watch what you are doing and
use common
sense. Do not operate tool when
you are tired. Do not rush.
30.
CHECK
DAMAGED
PARTS.
Before further
use
of the tool, a guard or other part that is damaged
should be carefully checked to determine
that it
will operate
properly and perform
its intended
function.
Check for alignment
of moving parts,
binding
of moving
parts,
breakage
of parts,
mounting,
and any other
conditions
that may
affect its operation.
A guard or other part that is
damaged should be properly repaired or replaced
by an authorized
service center unless indicated
elsewhere
in this instruction manual.
31.
DO NOT USE TOOL IF SWITCH DOES NOT
TURN IT ON AND OFF. Have defective switches
34.
35.
36.
37.
replaced
by an authorized
service center.
INSPECT
FOR and remove all nails from lumber
before trimming.
DRUGS,
ALCOHOL,
MEDICATION.
Do not
operate tool while under the influence of drugs,
alcohol, or any medication.
WHEN
SERVICING
USE
ONLY
IDENTICAL
CRAFTSMAN
REPLACEMENT
PARTS.
POLARIZED
PLUGS.
To reduce
the
risk of
electric shock, this tool has a polarized plug (one
blade is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does
not fit, contact a qualified
electrician
to
install the proper outlet. Do not change the plug
in any way.
DO NOT USE TOOL
UNDER
"BROWN-OUT"
OR
OTHER
LOW
VOLTAGE
CONDITIONS.
Also, do not use with any device that could cause
the power supply voltage to change.
SAVE
THESE
INSTRUCTIONS.
Review them
frequently
and use them to instruct others who
may use this tool. If you loan someone
this tool,
loan them these instructions also.
WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction
activities
contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Setne examples
of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on
how often you do this type of work. To reduce your i
exposure to these chemicals:
work in a well ventilated
area, and work with approved
safety equipment,
such
as those dust masks that are specially designed to filter
[
WARNING: J
out
m icroscopic particles.
,
f_
The operation of any laminate trimmer can result in foreign objects being thrown Into your
|
_/uu'_t ,,_UL_,._)]
eyes, which can result In severe eye damage.
Before beginning power tool operation,
|
p_
always wear safety goggles or safety glasses with side shields and a full face shield when
i
_
needed. We recommend Wide Vision Safety Mask for use over eyeglasses
or standard
L
_
safety glasses with side shields, available at Sears Retail Stores.
Page 4
Advertisement
Table of Contents
