Table of Contents
Advertisement
Your trimmer has been shipped completely assembled and
ready for use. After removing it from the carton, inspect it
carefully to make sure no breakage or damage has occurred
during shipping. Ifany parts are damaged or missing, contact
your nearest Sears Retail Store to obtain replacement parts
before attempting to operate trimmer. A 1/2 in. diameter flush
trim bit,owner's manual, two wrenches, and case are included
in the carton.
WARNING:
If any parts are missing, do not operate your trimmer until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
i
KNOW YOUR TRIMMER
See Figure 1.
Before attempting to use your trimmer, familiadze yourself
with all operating features and safety requirements.
Your trimmer is a versatile woodworking tool which will give
you years of trouble-free performance. It is engineered with
the professional in mind, but its ease of operation allows the
amateur to produce work which is beautiful and precise.
As the name implies your trimmer can be used for trimming
laminates. When used with recommended accessories, it
becomes even more versatile.
WARNING:
Do not allow familiarity with your trimmer to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict severe injury.
HEAVY
DUTY MOTOR
Your trimmer has a powerful 3.8 amp motor with sufficient
powerto handle many trimmingjobs. It iscapable if delivering
3/4 horsepower for heavy duty performance. The motor also
has removable brushes for ease of servicing.
SWITCH
To turn your trimmer ON, slide the switch on top of the
trimmer to ON position. Return the switch to OFF position
when finished.
DEPTH OF CUTSCALE
Your tdmmer's cutting depth can be adjusted by using the
depth of cut scale. To adjust to desired depth, loosen the
wing bolt and move the base until the tip of the cutter lightly
comes in contact with the surface. The depth of cutting is
zero at this point. Move the base further to the relative mark
on the scale that corresponds with your desired cutting
depth. Finally, tighten the wing bolt. You will get your desired
depth of cutting.
WARNING:
The operation of any trimmer can result in foreign objects
being thrown into your eyes, which can result in severe
eye damage. Before starting power tool operation, always
wear safety goggles or safety glasses with side shields
and a full face shield when needed. We recommend wide
vision safety mask for use over eyeglasses or standard
safety glasses with side shields.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for usewith this tool. Any such alteration
or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
APPLICATIONS
(Use only for the purpose listed below)
•
Smooth, professional trimming of laminates.
•
Cabinet making, trimming counter tops, and finishing
work.
•
Trimming wood and plastics.
Page 6
Advertisement
Table of Contents
