Advertisement
Maximum CutterDiameter
Collet
Input
Rating
35 mm (1-3/8 in.)
6.4 mm (1/4 in.)
3.8 Amperes
120 volts, 60 Hz, AC
No Load Speed
Power Cord
Net Weight
23,000 RPM
3.05 m (10 ft.)
6.6 kg. (3.0 lbs.)
Your trimmer has been shipped completely
assembled and ready for use. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate
trimmer. A 13 mm (1/2 in.) diameter flush trim bit,
owner's manual, two wrenches, and case are included
in the carton.
_
WARNING:
any parts are missing,
If
do not
operate your trimmer until the missing parts are
replaced. Failure to do so could result in possible
KNOW YOUR TRIMMER
See Figure 1.
Before attempting to use your trimmer, familiarize
yourself with all operating features and safety
requirements.
Your trimmer is a versatile woodworking tool which
will give you years of trouble-free performance.
It is
engineered with the professional
in mind, but its ease
of operation allows the amateur to produce work
which is beautiful and precise.
As the name implies your trimmer can be used for
trimming laminates. When used with recommended
accessories, it becomes even more versatile.
_
WARNING:
Do not allow familiarity with your
trimmer to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
HEAVY
DUTY MOTOR
Your trimmer has a powerful 3.8 amp motor with
sufficient power to handle many trimming jobs. The
motor also has removable brushes for ease of
servicing.
SWITCH
To turn your trimmer ON, slide the switch on top of the
trimmer to ON position. Return the switch to OFF
position
when finished.
ELECTRICAL
CONNECTION
Your trimmer has a precision built electric motor. It
should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household
current).
Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and
the motor will overheat. If your trimmer does not
operate when plugged into an outlet, double-check the
power supply.
6
DEPTH OF CUT SCALE
Your trimmer's cutting depth can be adjusted by using
the depth of cut scale. To adjust to desired depth,
loosen the wing bolt and move the base until the tip of
the cutter lightly comes in contact with the surface.
The depth of cutting is zero at this point. Move the
base further to the relative mark on the scale that
corresponds with your desired cutting depth. Finally,
tighten the wing bolt. You wilt get your desired depth
of cutting.
A
WARNING:
The operation of any trimmer can
result in foreign objects being thrown into your
eyes, which can result in severe eye damage.
Before starting power tool operation, always wear
safety goggles or safety glasses with side shields
and a full face shield when needed. We
recommend wide vision safety mask for use over
eyeglasses or standard safety glasses with side
shields.
A
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use
with this tool. Any such alteration or modification
is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
APPLICATIONS
(Use only for the purpose listed below)
•
Smooth, professional trimming of laminates.
•
Cabinet making, trimming counter tops, and finish-
ing work.
•
Trimming wood and plastics.
Advertisement
