Advertisement
HELPFUL
HmNTS
_/
Always clamp workpiece securely before routing.
,/
A safe operator is one who thinks ahead.
,/
Always wear eye protection when routing.
V" Make setup adjustments carefully. Then double
check. Measure twice and cut once.
7"
Keep cutters clean and properly sharpened.
_/
Don't let familiarity make you careless.
_/
Study all safety rules and do the job safely.
,/
Never place your hands in jeopardy.
,/
Make certain clamps can't loosen while in use.
_/
Test difficult setups on scrap -- Don't waste
lumber.
_/
Plan each operation before you begin.
7"
Provide for smoother operation by cleaning your
router frequently. Shake router or blow with an air
jet to remove sawdust buildup.
_/
Think safety by thinking
ahead.
STARTmNG/STOPPmNG
ROUTER
[] Grasp handles using both hands. See Figure 9a.
[] To start router: Toggle the switch to the t position.
See Figure 9b.
[] To stop router: Toggle the switch to the O position.
See Figure 9b.
HANDLE
POWER
HANDLE
( o ) TO STOP
Fig. 9a
(I) TO START
SWITCH
Fig. 9b
12
Advertisement
