Connecting To A Powerbook - Epson ELP-3000 Owner's Manual
Epson owner's manual projector elp-3000
Hide thumbs
Also See for ELP-3000:
- Product support bulletin (9 pages) ,
- Product information (2 pages) ,
- Easy setup (1 page)
Table of Contents
Advertisement
Connecting to a PowerBook
10
1
l
Your PowerBook must have a video-out capability, See page 6 for more information.
Before beginning, turn off the projector and computer if they are on. To access the
connectors on the projector, push open the cover located on the right side of the
projector, under the handle.
1. Attach the video-out cable supplied with your PowerBook to the video-out
connector on the back of the PowerBook.
2. Attach the Macintosh VGA adapter to the VGA connector of the Y-cable.
3. Connect the VGA Macintosh adapter to the video-out cable.
4. Connect the Y-cable's LCD connector to the projector's Computer IN/OUT port.
5. Tighten the screws for all connectors to make sure they are fastened securely.
6. In the PowerBook's Display Control Panel, select Mirroring.
Installation
Advertisement
Table of Contents
