PC Free Basic Operations
Closing PC Free
f
Procedure
A
Tilt the [h] button on the remote control up to
position the cursor on the "Exit" button.
B
Press the [Enter] button on the remote control.
PC Free shuts down and the EasyMP standby screen is displayed.
C
After turning off the power supply to the digital
camera or the USB storage device, disconnect it
from the projector's USB Type A port.
When a CompactFlash card is in use, check the status of the access
indicator at the card slot before removing the card.
If you leave the USB storage device connected when you
q
close PC Free and the EasyMP standby screen is displayed,
disconnect the USB storage device and reconnect it before
starting PC Free again.
44