Selecting The Projector To Be Operated; Stopping, Pausing, And Resuming Projection; Projectors - Epson EMP 1815 Operation Manual

Epson projector and software

Hide thumbs Also See for EMP 1815:

Table of Contents

Using the Toolbar

Selecting the Projector to be Operated

You can select which projector to operate when connected to multiple

projectors. When the "Select target projector" screen is opened, all

currently connected projectors can be selected as a target projector.

Procedure

Click the

("Select target projector") button.

The "Select target projector" screen is displayed.

Select the checkbox for the projector to be

operated.

Select the projector to be operated.

Click the "

" in the top right of the screen to close

the "Select target projector" screen.

The screen number assigned on Multi-

display is shown.

You can stop, pause, and resume projection of computer images when

connected to the projector.

Procedure

Select the projector to be operated. s

Click one of the following.

"Stop" button: Stops projection of the computer image.

"Show" button: Starts projection of the computer image.

"Pause" button: Pauses projection of the computer image. The

image at the point it was paused is projected.

p.7

Table of Contents

Easymp