JVC KW-NX7000 Instructions Manual page 52

Function Menu —Map Settings (continued)
Menu items
1 2
Scale Unit* *
Vehicle Position
Clear User Memory
Restore Factory Settings
Reset Calibration Data
Access Navi SD
Startup Message*
Shutdown Message*
1
* The unit setting you find at your first access to the menu varies depending on your country selection in the initial
settings (☞ page 7); when <United Kingdom> was selected, <mile> was set; when other countries, <km>.
2
* Regardless of this setting, the distance unit for the voice guidance is always kilometers in languages other than
<English UK>. (☞ page 51)
3
* Selectable only when at least one place is registered.
4
* The languages available for the message are: English, Spanish, French, German, Italian, Dutch, Danish, Swedish,
Russian, and Portuguese.
For entering the characters, ☞ page 28.
5
*
Selectable settings, [reference page]
Select the measuring units for distance.
km, mile
If you find your current position displayed on a wrong place on the map,
use this setting to correct your position.
• To change your position, move the cursor to the position where you
want to set as current position and press [OK], then adjust the direction
by pressing [ ]/[ ] and press [OK].
: Initializes the list of your favourite points. ☞ [24]
3
Favourite*
: Initializes the list of previous destinations and via points. ☞
3
Previous*
[36]
: Initializes the registration of your home. ☞ [24]
3
Home*
Initializes all your settings.
• When you press [Restore], a confirmation message appears. Press [Yes]
to confirm the operation. Press [No] to cancel.
The Navigation System is gradually optimised by automatic calibration.
Reset the calibration data in the following cases:
• When you reinstall the unit in another car.
• When you replace or rotate the tyres.
Once this is carried out, the calibration data is cleared.
• When you press [Reset], a confirmation message appears. Press [Yes]
to confirm the operation. Press [No] to cancel.
Select this to update your map database using an SD card.
• When you press [Open the Front Panel], the front panel opens. Press
[Cancel] to cancel the operation.
• For details about updating your unit, visit <http://www.jvc-exad.com>
(English website only).
4
Edit the voice message at startup/shutdown of the System.
• To edit the message, press [Edit], enter the message, then press [OK].
4
You can listen to the edited message by pressing [Test].*
The procedure for setting an item is shown on page 16.
52
Initial:
Underlined
5