Additional Components; Positioning The Projector - Epson EX31 User Manual

Additional Components

Depending on how you plan to use the projector, you may need
additional components:
To receive an HDMI signal from your video device, you'll need
■
an HDMI cable (EX51/EX71 only). One may be provided with
your video equipment.
To receive a component video signal from a DVD player or other
■
video device, you'll need a component-to-VGA video cable. One
may be included with your video equipment, or you can purchase
the ELPKC19 cable from Epson. See "Optional Accessories" on
page 16.
■ To receive an S-Video signal, you'll need an S-Video cable. One
may be included with your video equipment, or you can purchase
one from Epson. See "Optional Accessories" on page 16.
To receive an audio signal, you'll need an RCA-type audio cable
■
with two male plugs, or a stereo mini-jack audio adapter cable
(with red and white jacks on one end) for the EX31.

Positioning the Projector

If the projector isn't already installed in the room you're using, you'll
probably want to place it on a table in front of the screen. This lets
you stand in the front of the room, face the audience, and remain
close enough to the equipment to be able to control it.
Keep these considerations in mind as you position the projector:
Place the projector on a sturdy, level surface.
■
■ Make sure there is plenty of space for ventilation around and
under the projector.
Make sure the projector is within 5.9 feet (1.8 meters) of a
■
grounded electrical outlet or extension cord.
Setting Up the Projector
21