Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from Epson (see page 16) or an
electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the
Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video)
optional component-to-VGA video cable or adapter.
EX31
EX51/EX71
3. You may need to change the
projector's Signal menu to
4. If you want to play sound through the projector, see page 37 for
instructions on connecting an audio cable.
port on your projector using an
Computer (Component
Video) port
Computer (Component
Video) port
setting in the
Input Signal
(see page 68).
Auto
Setting Up the Projector
35