Connecting A Component Video Source - Epson PowerLite 1730W User Manual

Connecting a Component Video Source

You will need a component-to-VGA cable, or a component video
cable and adapter, for this connection. You can order the
component-to-VGA cable (ELPKC19) from Epson; see page 12 for
more information.
1. Locate a component-to-VGA video cable or adapter.
2. Connect the cable to your player and the blue
(Component Video)
an adapter, connect it to a standard component video cable as
shown below.
Component
video cable
3. If you want to play sound through the projector, see page 47 for
instructions on connecting audio cables.
4. If you don't need to make any other connections, see page 15 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
button on the remote control or the
Search
button on the projector's control panel.
connector on the projector. If you're using
Component-to-
VGA adapter
Component-to-VGA cable
(ELPKC19)
Connecting to Computers and Other Equipment
Computer
Source Search
note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or Component
Video (see page 55).
45