Sharp IM-DR410H Operation Manual page 23

! Volume control
Press the VOL + button to increase
the volume and the VOL - button to
decrease the volume.
Volume (0 - 30)
The sound escaping from your earphones may annoy
people around you. In particularly crowded places (such
as on trains or buses), reduce the volume.
! Bass control
Each time the BASS button is pressed, the bass
response will be switched as follows.
BASS 1 Emphasised slightly.
BASS 2 Emphasised more.
BASS 3 Emphasised fully.
BASS OFF Cancelled. (Default setting)
! To customise low and high levels
You can set 3 types of bass settings (BASS 1 - BASS 3)
by adjusting low (Lo) and high (Hi) boost for each setting.
Emphasising low (Lo) and high (Hi) sound of BASS 3.
Lo5 Hi5
BASS 3
Lo Frequency Hi
IM-DR410H TINSZ0960AWZZ
1
During playback, press the MENU/ENTER but-
ton.
2
Press the or
"SOUND ADJ" and then press the MENU/ENTER
button.
3
Press the or
repeatedly to select bass
setting, and the VOL + or
VOL - button to select "B3".
4
After selecting "Lo" or "Hi"
with the or
press the VOL + or VOL -
button to adjust the low or
high sound setting.
5
Press the MENU/ENTER button.
Repeat steps 1 - 5 to change the other bass setting.
Notes:
" If you set the volume to 23 or more, the bass boost will
be adjusted automatically.
" When you make the setting of "To customise low and
high levels" with the volume level set to 23 or more,
Default
the volume level will be reduced to 22 automatically.
03/7/21
IM-DR410H
ENGLISH
button repeatedly to select
button
B3
button,
E-16
IM-DR410H_SEEG_E.fm