Sharp IM-DR410H Operation Manual page 37

Master MiniDisc operation
1
Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2
Whilst in the stop mode, press the MENU/ENTER but-
ton.
3
Press the or button repeatedly to select "EDIT".
4
Press the MENU/ENTER button.
5
Press the or button
repeatedly to select "NAME
STAMP".
6
Press the MENU/ENTER
button.
To cancel the operation, press the :OFF/HOLD button.
7
Press the MENU/ENTER button.
8
When the unit displays "CHANGE MD", remove the
master MiniDisc.
Remove it without turning off the power. Or, the operation
will be cancelled.
IM-DR410H TINSZ0960AWZZ
Operation of the MiniDisc for stamping
9
Load a MiniDisc for stamping.
10
Press the MENU/ENTER button.
The unit will finish recording the character information and
enter the stop mode.
Note:
If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display "Can'tSTAMP" and turn off.
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
03/7/21 IM-DR410H_SEEG_E.fm
IM-DR410H
ENGLISH
E-30