Using The Direct Power On Function - Epson PowerLite 732c User Manual

3. Press the P
Power
light flashes orange for about 20 seconds as the projector
Power
cools down. After the projector has cooled, the projector beeps
twice, the orange light stays on, and the exhaust fan shuts off.
If you want to turn the projector on again, wait until the orange
light stops flashing. Then press the P
4. If you extended the adjustable front foot, press up on the blue
foot release lever to retract it.
5. Replace the lens cap and unplug the power cord.

Using the Direct Power On Function

The Direct Power On function enables faster setup. The projector will
start up automatically when you plug it in; you won't have to press the
button.
Power
P
Follow these steps to enable Direct Power On:
1. Press the button on the remote control and select the
Menu
menu.
Extended
2. Choose
Operation
3. Choose
Direct Power On
4. Highlight and press
On
5. Press or
Esc Menu
The setting will take effect the next time you plug in the projector.
button again. The lamp is turned off and the
Power
and press .
Enter
and press
Enter
.
Enter
to exit.
button.
.
Displaying and Adjusting the Image
caution
Turn the projector off when
not in use. Continuous
24-hour-a-day use may
reduce the projector's
overall life.
note
If a power outage occurs
when Direct Power On is
enabled and the projector is
plugged in, the projector will
start when the power is
restored.
25