Cleaning The Air Filters And Vents - Epson PowerLite 732c User Manual

Epson user's guide multimedia projector powerlite 732c, powerlite 740c

Hide thumbs Also See for PowerLite 732c:

Table of Contents

Cleaning the Air Filters and Vents

Clean the air filters and air intake vents after every 100 hours of use. If

they are not cleaned periodically, they can become clogged with dust,

preventing proper ventilation. This can cause overheating and damage

the projector.

Follow these steps:

1. Turn off the projector. Wait for the

then unplug the power cord.

2. Turn the projector upside down.

3. To clean the intake vents, use a small vacuum cleaner designed for

computers and other office equipment. If you don't have one,

gently clean the vents with a soft brush (such as an artist's

paintbrush).

4. If the dirt is difficult to remove or the filter is broken, replace the

filter as described on page 64. Contact your dealer or call Epson at

800-GO-EPSON (800-873-7766) to obtain a new filter.

light to stop flashing,

Power

note

To order replacement air

filters, request part number

V13H134A08. See page 11

for ordering information.

Maintaining the Projector

Table of Contents

Powerlite 740c