Replacing The Batteries; Using Password Protection; Setting A Password - Epson PowerLite 765c Parts Manual

Replacing the Batteries

Caution:
When replacing batteries, take the following precautions:
Replace the batteries as soon as they run out. If a battery leaks,
wipe away battery fluid with a soft cloth. If fluid gets on your
hands, wash them immediately.
Do not expose batteries to heat or flame.
Dispose of used batteries according to local regulations.
Remove the batteries if you won't be using the projector for a
long time.
Follow these steps to replace the AAA alkaline batteries:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
3. Replace the battery cover. (It should snap into place.)
Epson PowerLite 755c/765c Projector

Using Password Protection

If you assign a password for the projector, a screen appears
requesting the password whenever you plug in and turn on the
projector. If you enter the password incorrectly three times in
succession, the projector's operation is locked. Disconnect the
projector from the power source and reconnect it. If you enter
the incorrect password 30 times in a row, the projector is locked
and remains locked until an authorized Epson servicer can
unlock it.
You can also create a user's logo for the projector, to be
displayed as the startup screen and/or AV/Mute screen.
Unauthorized users cannot turn it off or change it. This
discourages theft and provides a way to identify the projector
should it be stolen.
Additionally, to make sure a borrowed projector is returned,
you can temporarily disable the password for a set period of
time. When that time has elapsed, the password function is
reactivated and you must enter the password before you can use
the projector.
Note:
If you should happen to enable the password before you set one,
enter the default password
If you lose the remote control, you will not be able to enter the
password; so keep the remote control in a safe place at all times.

Setting a Password

1. Press the button on the remote control for about
Freeze
5 seconds, until you see the Password Protect menu:
If a password has already been set, you see the Password
Protect Release screen. See "Starting the Projector with a
Password" on page 10.
2. Set
Power ON Protect
3. Press .
Esc
4. Select and press
Password
Change the password?
5. Select and press
Yes
8/05 Epson PowerLite 755c/765c Projector
when prompted.
0000
to and press .
ON Enter
. You see the message
Enter
.
Enter
9
-