Off Timer - Sharp 14AG2-DC Operation Manual

Timers (continued)

OFF Timer:

Automatically turns to Standby mode after the set length of time has passed.
1
2
4
5
7 8
0
CH
CH
@
FUNCTION TIMER
!,#
SYSTEM NORMAL
TV
• To cancel the Off Timer, press the NORMAL button during the Off Timer mode.
• The minute setting of the timer is in 10-minute units.
• The Off Timer is cancelled if the power is turned off with the STANDBY/ON (B) button on the remote control
or the POWER (X) switch on the TV set or if the power is otherwise cut off.
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically
terminated and the TV set returns to normal mode.
I Setting the Off Timer
TV/VIDEO !
Press the TIMER button 2 times
and the OFF
3
6
9
@
Press the VOLUME UP ( ) or
DOWN ( ) button to set the time.
(Maximum time that can be
preset is 12 hours and 50
PICTURE
minutes.) In this state, the Timer
starts to count down.
#
When you have finished setting
the time, press the TIMER button
2 times. The on-screen display
disappears.
I Action of the Off Timer
5 minutes before the Off Timer
activates, the remaining time is
displayed on the screen for 3
seconds, and reappears at the start
of every remaining minute.
A flashing display of the remaining
time appears on the screen during
the last five seconds before the Off
Timer activates.
When the preset length of time (in
the above example, 2 hours and 30
minutes) has passed, the TV set
enters Standby mode.
display appears.
Flashing for 5 seconds
(The power turns off)
15