Tips About Indicator Panel - Sharp AY-XP12GHR Operation Manual

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according
to the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
the fi gures in ( ) are temperature settings
During operation, if the outdoor temperature changes, the temperature settings will automati-
cally slide as shown in the chart.

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press
the DISPLAY button in the following manner.
The room temperature is
displayed.
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual temperatures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C (
than 40°C)
Outdoor temperature: –9°C ~ 45°C (
higher than 45°C)
• is displayed during the fi rst 60 seconds of operation while the temperatures are being
detected.
• Only the room temperature can be displayed for 5 seconds when the unit is not in operation.
• During SELF CLEAN operation, the indicator panel will display remaining time of the opera-
tion. Room and outdoor temperature will not be displayed even if you press the DISPLAY
button.
The outdoor temperature
is displayed.
is displayed when less than 0°C and
is displayed when less than –9°C and
GB-9
No display.
when higher
when