Table of Contents
Advertisement
Receipt printer (continued)
Slip printer
Procedure
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO:
Disables auto cutter function.
• PAPER SHEET (Use the selective entry)
Select a paper type.
TWO OR MORE: Uses two or more sheets.
ONE SHEET:
Uses one sheet.
This option is available when the "TM-300" is selected.
NOTE
• HEAD LOGO PRINT (Use the selective entry)
Select a header logo print timing.
EACH ISSUE: The logo will be printed on the receipt just
after the current transaction is finalized.
PRE-PRINT: The logo will be printed beforehand on the
next receipt when the current transaction is
finalized.
• RCPT LENGTH (Use the numeric entry)
Minimum length of the bill to be printed paper on the receipt
paper
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
ER-FBP40
TM-295
TM-U950
TM-T88/85/88(3)
• INITIAL FEED# (Use the numeric entry)
Initial line feed for a slip (0 to 64 lines)
• SLIP MAX LINE (Use the numeric entry)
Maximum number of lines printable on a slip (0 to 99)
TM-300
TM-5000
TM-U210/230
TM-T88(3)+LOGO
201
Advertisement
Table of Contents
