Contactless Key - Sharp UP-3301 Instruction Manual

I Contactless key
You can program a clerk code for each contactless clerk key, and confirm the clerk name.
When you perform this programming, the corresponding contactless key must be set to the clerk switch.
You can program the same clerk code for two or more contactless clerk keys.
Procedure
M
Entering the clerk code
and touching the
ENTER
M
M
Confiremation of the clerk name
and touching the key
TL
M
When you continue the programming, set the
contactless key to the clerk switch.
When you finalize the programming, touch
the key.
CANCEL
NOTE
When you confirm a clerk code and clerk name for each contactless clerk key, perform the program reading
sequence "19 CONTACTLESS KEY" of the section "Reading of Stored Programs".
184
Program the item as follows:
• CLERK CODE (Use the numeric entry)
• CLERK NAME (Use the character entry)
key
Clerk code (max. 4 digits: 0001 to 9999)
The entry of "0" disables the use of contactless clerk keys.
Clerk name (max. 12 characters)