Epson PowerLite TW100 Quick Setup

EPSON
1

Unpack the projector

Your projector comes with the following items:
Power cord
Projector
2
Connect your video source
The projector has 5 connectors, as shown below. Each one is color-coded and requires
a different type of cable (not included). You can connect up to 5 video devices and
use the remote control to switch from one to the other.
1
Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best quality.
For example, component video produces higher quality images than
S-video or composite video.
2
Make sure you have the right cable(s) for the connection(s) you want to use,
and the cables are long enough for your setup. If you need a cable longer
than the standard 6 to 10 feet, you may need a distribution amplifier.
3
Before you connect your equipment, make sure everything is turned off.
4
Connect your video equipment to the projector using any of the available
connections shown below.
TV
VCR
DVD player Camcorder
HDTV tuner Video game console
Component video
Component RCA video cable to VGA cable or
video cable (composite video) VGA computer cable
Trigger
RS-232C
Trigger
port
Note: For additional instructions on connecting a computer, see your
User's Guide. You can also connect an optional, retractable electric
screen to the Trigger port. The screen will open when you turn on
the projector, and retract when you turn it off.
® PowerLite ® TW100
Home Theater Projector

Quick Setup

Batteries
Remote control Rubber feet
TV
VCR
DVD player
DVD player Camcorder
HDTV tuner Cable/satellite box
DVI to DVI cable
or DVI to DFP cable
or DVI to VGA cable
S-video cable
Input B
RGB/YCbCr/YPbPr A-RGB/D-RGB DVI-I
S-Video
Video
Input A
Y Cb/Pb Cr/Pr

Choosing a location

The projector supports 5 viewing setups. Choose the best one for your home theater
environment. If you install the projector in a rear or overhead position, you'll need
to choose the correct Projection option (identified below) from the Setting menu
after you turn it on.
Computer
The distance between the projector and the screen determines the size of the image.
The diagram below shows approximately how big your image will be, based on
where you set up the projector.
7.9 inches
Table
Convenient for temporary front projection.
Shelf
For temporary or permanent installation
on a high shelf. Attach the rubber feet
and place the projector upside-down.
Choose Front/Ceiling for the Projection
option.
Ceiling
Professional installation recommended.
Choose Front/Ceiling for the Projection option.
Rear
For permanent installation behind a translucent screen.
Choose Rear for the Projection option.
Rear/Ceiling
Professional installation behind a translucent
screen recommended. Choose Rear/Ceiling
for the Projection option.
31-42'
20-28'
10-14'
8-11'
6-8'
4-5'
80"
3-4'
60"
40"
30"
2.6"
2" 4" 5.4"
Distance from center of lens to bottom edge of screen
Turn over
Attach the 3 rubber feet
Screen size
(diagonal)
300"
200"
100"
6.7" 13.5" 20"