Fax Reception On A.m. Failure - Sharp FO-880 Operation Manual

Optional Answering Machine Settings

Fax reception on A.M. failure

If the memory for recording incoming messages becomes full while
you are out, the answering machine will no longer be able to record
messages. The ON A.M. FAILURE setting is used to choose the
response of the machine to incoming calls when this happens:
Automatic fax reception NO: The FO-880 will answer after 20
rings, after which it will wait to receive a remote command. Most
callers will hang up before it answers; however, when you call the
FO-880 from a remote location, you can wait until it answers,
listen to your messages, and then erase them (see Remote
Operations in this chapter).
Automatic fax reception YES: The reception mode will switch to
FAX mode, allowing the FO-880 to continue to receive faxes
automatically without broadcasting an OGM on answering. With
this setting, you can still use the remote commands to listen to
your messages and erase the message memory (see Remote
Operations in this chapter).
Automatic fax reception is set to NO at the factory before shipping. If
you want to set it to YES, press the panel keys as follows:
1
Press these keys:
The display will show:
2
Press these keys:
The display will show:
3
Press 1 to turn automatic fax reception
on, or 2 to turn it off.
4
Press the STOP key.
44
A.M. SETTINGS
ON A.M. FAILURE
FUNCTION
0
1 2
or
STOP