Epson Expression 1680 User Manual page 30

5. Place the 35mm filmstrip
guide on the document table,
and align it with the ruled edges of
the document table.
6. Close the TPU and begin
scanning.
If you're using EPSON Scan,
follow these guidelines:
■
Choose either
■
In Home Mode, choose the correct Document Type (
B&W Negative Film
■
In Professional Mode, select
select the correct Film Type.
Loading 35mm slides
Follow these steps to load 35mm slides:
1. Load slides in the 35mm slide holder as shown.
Make sure the glossy side of each slide faces down,
and the film emulsion layer faces up.
2. Position the slide holder on
the document table. Align the slide
holder with the ruled edges of the
document table.
3. Close the TPU and begin your scan.
If you're using EPSON Scan, follow
these guidelines:
■
Choose either
Professional Mode
■
In Home Mode, choose
■
In Professional Mode, choose
Positive Film
24
Using Optional Equipment
or
Home Mode Professional Mode
, or
Positive Film
Transparency
or
Home Mode
.
Positive Film
Transparency
the Film Type.
.
Color Negative Film
).
as your Document Type, then
as your Document Type.
as your Document Type and
,