Loading 4 × 5-inch film
Follow these steps to load 4 × 5-inch film:
1. Place the 4 × 5-inch film guide on a flat
surface and remove the cover from one of
the film holders.
2. Insert the film in the film holder, making
sure the glossy (smooth) side of the film
faces down and the film emulsion layer
faces up. Then close the cover.
Note: Make sure that the film cover is
completely closed, and that it holds the film
taut without bowing. Bowing can cause
distortions in the scanned image.
3. Repeat steps 1 and 2 for all the film you scan.
4. Place the 4 × 5-inch film guide on
the document table. Align it with the
ruled edges of the document table as
shown.
5. Close the TPU and begin your scan.
If you're using EPSON Scan, follow
these guidelines:
■
Choose either
■
In Home Mode, choose the correct Document Type (
Negative Film
■
In Professional Mode, select
select the correct Film Type.
or
Home Mode
Professional Mode
, or
B&W Negative Film
Transparency
.
Positive Film
).
as your Document Type, then
Using Optional Equipment
,
Color
25