4. When you see the EPSON Screen Calibration
Utility, move the slider right or left until the
stripes match as closely as possible. Then click
.
OK
The EPSON Screen Calibration
Utility calibrates the preview image you see in your EPSON
TWAIN Pro driver to match your monitor settings.
You won't need to change the screen calibration as long as
you continue to use the same display. If you need to
recalibrate your screen at a later time, open the EPSON
TWAIN Pro window by double-clicking the EPSON TWAIN Pro
icon in the Windows Control Panel. Then click the Screen
Calibration button at the bottom of the window to start the
utility.
5. Follow the instructions on the screen to
install EPSON Scan Server. When you see
the window on the right, make sure
Expression1640XL
Scanner Selection
as the scanner server
Dialogbox
. (See "Changing the Scan Server Start
Mode
Up Mode" on page 91 for details.)
6. Click
to test scanner operation.
Test
OK. Scanner Available
Scanner Information
communicating with the scanner server.
Click
to close the window.
OK
is selected under
. Select either
Icon
Startup
appears under
if the scanner is
or
89