Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Remove LU
Intermittent Error Monitor
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
19
Use the results of the view operation to check the version of the installed
.
HDLM.
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM
has been installed.
20
Use the results of the view operation to check that the programs are
.
running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
the programs are running correctly.
21
Check the path information as described in
.
Configuration on page
installed HDLM in a single-path configuration.
22
Connect cables to all the HBAs to change the configuration to a multi-path
.
configuration.
Figure 3-3 Single Path Configuration and Multi-path Configuration on page
3-33
3-32
x.x.x-xx
x.x.x-xx
x.x.x-xx
-
3-68, and make sure that you have successfully
shows a single path configuration and a multi-path configuration.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
: off
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
: off
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss 128
WakeupTime
yyyy/mm/dd hh:mm:ss
Checking the Path
ElogMem Size