Table of Contents
Advertisement
Motor Speclfic.tions
and Eiectr, cat Requirements (continued)
i : i DANGER: To aVoid electrocution:
_
;_
; I
U_e only identical
replacement
parts when ser-
vicing!
Servicing
should
be performed
by a
qualified service technician.
2i Do not use in rain or where floor is wet.
This tool is intended for indoor residential
use
;:
:only.
,In _he event of a malfunction
or breakdown,
grounding
provides a path of least resistance for electric current to
reduce the risk of electric shock. This tool is equipped
with an electric cord having an equipment grounding con-
ductor and a grounding plug, as shown. The plug must
be plugged
into a matching
outlet that
is properly
installed and grounded in accordance with all local codes
and ordinances.
Donot modify the plug provided. If it witt not fit the outlet,
have the proper outlet installed by a qualified electrician.
A temporary adapter may be used to connect this plug to
a 2-pole outlet, as shown. This temporary adapter should
be used only until a properly grounded outlet can be
installed by a qualified
electrician.
The green colored
rigid ear, lug land the like, extension from the adapter
must
be connected
to a permanent ground such as a
properly grounded outlet box.
Properly
r_
3-Prong Plug
Grounding
Prong
Green
_
Make Sure This
Improper connection
of the equipment
grounding con-
Grounding
ug
I__
Is Connected
duct0r Can result in a risk Of electric shock. The conduc-
€l"l_
_
to a Known
:i tbr:With insulation having an outer surface that is green
3-Prong
v
|
_
_
Ground
::
Withor without yelloWstripes
isthe equipment grounding
Plug
C
ll "_"
: C0nduct0i'.
if repairor
replacement of the electric cord or
\
/'_
_
_,_]_g.J_
plug _s necessary; do not connect the equlpment_ground-
_._'_"
!_ _ ,]
2-Prong
::
If;the grounding instructions
are not completely
under-
ff'_
Adapter
Outlet
sto0d, or if you are in doubt as to whether the tool is prop-
erly groundedbheck
with a qualified electrician Or service
personnel.
:
:_
....
,
,,,,
WARNING: If not properly grounded, this tool can
cause an electrical shock_ particularly when used
in damp locations, in proximity to plumbing, or out
of doors. If an electrical shock occurs there is the
potential
of a secondary
hazard, such as your
hands contacting the knives.
WARNING Do not permit fingers to touch the ter-
minals of plug when installing
or removing
the
plug to or from the outlet.
If power cord is worn or cut, or damaged
in any way,
have it replaced immediately.
110-120 Volt, 60 Hz. Tool Connections
NOTE: The adapter illustrated is for use only if you already
have a propedy grounded2-prong outlet.
Grounding
Prong
nded
Outlet Box
220-240 Volt, 60 Hz. Tool Connections
Hide quick links:
Advertisement
Table of Contents
