Craftsman 315.341300 Operator's Manual page 10

UNPACKING
This product has been shipped completely as-
semble&
[] Carefully remove the product and any acces-
sories from the box, Make sure that all items
listed in the packing list are included.
WARNING; Do not use this product if it is not
completely assembled or if any parts appear
to be missing or damaged. Use of a product
that is not properly and completely assem-
bled could result in serious personal injury°
m Inspect the product carefully to make sure no
breakage or damage occurred during ship-
ping°
m Do not discard the packing material until you
have carefully inspected and satisfactorily oper-
ated the product.
m If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Chain Saw with Chain Cover
Wrench
Battery Pack
Charger
Operator's Manual
A
WARNING; If any parts are damaged or
missing do not operate this product until the
parts are replaced° Using the saw with dam-
aged or missing parts could result in serious
personal injury.
A
WARNING: Do not attempt to modi_ this
product or create accessories not recom-
mended for use with this product,, Any such
alteration or modification is misuse and
could result in a hazardous condition lead-
ing to possible serious personal injury.
A
WARNING; To prevent accidental starting
that could cause serious personal injury,
always remove the battery pack from the
product when assembling parts.
,_ WARNING: Do not allow familiarity with
this product to make you careless. Remember
that a careless fraction of a second is sufficient
to inflict serious injury.
• _ WARNING-" Always wear eye protection
with side shields marked to comply with ANSI
Z87.1, along with hearing and head protection.
Failure to do so could result in objects being
thrown into your eyes and other possible
serious injuries_
_tL WARNING: Do not use any attachments
or accessories not recommended by the
manufacturer of this product. The use of
attachments or accessories not recommended
can result in serious personal injury°
Before each use, inspect the entire product for
damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners
and caps and do not operate this product until all
missing or damaged parts are replaced. Please
call I-800-932-3188 or contact an authorized
service center for assistance_
APPLICATIONS
You may use this product for the following
purposes:
[] Limbing and pruning branches from trees
la Felling small trees up to 5 in. diameter
m Bucking the fallen tree into shorter lengths
This product will accept Craftsman 19,2 V lithium-
ion battery packs and Craftsman 19o2 V nickel-
cadmium battery packs_
10 - English