Troubleshooting Tips - GE JVM2052 Owner's Manual

Hide thumbs Also See for JVM2052:
Table of Contents

Advertisement

Before you call for service..,
go.cam
Troubleshooting Tips
Save time and moneg! Review the charts on the following
pages first and gou mag not need to call for service.
Possible Causes
What To Do
Ovenwill not start
A fuse in gour home mag be
• Replacefuse or reset circuit breaker.
blown or the circuit breaker
tripped.
Power surge.
• Unplug the microwave oven, then plug it back in.
Plug not fullg inserted into wall
* Hake sure the 3-prong plug on the oven is fully inserted
outlet,
into wall outlet.
Door not securelgclosed.
• Open the door and close securelg.
Control panel lighted,
Door not securelgclosed.
• Open the door and close securelg.
get oven will not start
Start/Enter pad not touched
* Touch Start/Enter
offer entering cooking selection.
Another selectionentered
• Touch Clear/Of
alreadg in oven and Clear/Of
pad not touched to cancel it.
Cooking time not entered offer
* Hake sure you have entered cooking time after touching
touching Time Cook.
Time Cook.
Clear/Offwas
touched
• Resetcooking program and touch Start/Enter
accidentally.
Food weight not entered after
* Make sure you have entered food weight after selecting
selectingAuto Defrost or
Auto Defrost or Quick Defrost.
Quick Defrost.
Food tgpe not entered after
• Hake sure gou have entered a food tgpe.
touching Cook.
CONTROLLOCKED
The control has been locked.
* Touch and hold Clear/Off for about 5 seconds
appears on displag
to unlock the control.
OVEN TOO HOT FOR
SENSOR COOKING---
USING ALTERNATE
METHOD appears
on displag
One of the sensor cooking
pads was touched when the
temperature inside the oven
was greater than 200°1:.
• These features will not operate when the oven is hot.
The oven will automatically change to cook by time
(follow the directions in the display) or once the oven is
cool enough, the sensor features will function normallg.
Floor of the oven is warm
even when the oven has
not been used
The cooktop light is located
below the oven floor. When
light is on, the heat it produces
mag make the oven floor get
warm.
• This is normal.
You hear an unusual
You have tried to change
• Hang of the oven's features are preset and cannot
low-tone beep
the power level when it is
be changed.
not allowed.
Oven interior light does
The light bulb is loose
* Tighten or change the light bulb.
not work
or defective.
Oven takes longer than
The Power Level is not
* Resetthe Power Level.
normal to cook or cooks
programmed properlg.
too rapidlg
33

Advertisement

Table of Contents
loading

Table of Contents