Hood Lights - GE JV936 Owner's Manual And Installation Instructions

Care and cleaning of the vent hood.
Be sure electrical power is off and aft surfaces are cool before cleaning or servicing any part of
the vent hood.
Receptacle Socket
Hood Lights
/
ii
/
Glass c over
\ Bulb
NOTE: The glass cover should be removed
only when cold. Wearing latex gloves may
offer a better grip.
CAUTION: s efore
replacing
your light bulb, disconnect the electrical
power to the hood at the main fuse or
circuit breaker panel.
Be sure to let the light cover and bull) cool
completely°
For your safeb,, do not touch a hot bulb
with bare hands or a damp cloth.
TOremove:
[y] Turn
the glass cover cotmterclockwise
until the glass cover clea_s the sockeL
[_ Using gloves or a (h T cloth, remove
the bulb by pulling it straight out.
To replace:
S c ) c •
U_e a new 12w(lt, 20-watt (maxmmm)
,mJ
Halogen bulb for a (;-4 base.
[_ Using gloves or a (h T cloth, remove
the new bulb flom its packaging.
Receptacle
/
or cloth _
Push the bull) straight into the
receptacle all the way.
Place the gl_kss cover onto the socket
and mrn clockwise undl secure.
For improved lighting, clean file glass
cover flequently using a damp cloth.
This should be done when the hood
is complemly cool.
[_ Reconnect electrical power to
the hood.
NOTE: Do not touch the new halogen bulb
with bare fingers. Touchingthe bulb with
bare fingers will significantlyreduce the
life of the bulb.
6