Hood Lights - GE CV936 Owner's Manual & Installation Instructions

Care and cleaning of the vent hood.
Be sure electrical power is off and aft surfaces are cool before cleaning or servicing any part of
the vent hood.
Receptacle Socket
Hood Lights
/
ii
/
Glass c over
\ Bulb
NOTE: The glass cover should be removed
only when cold. Wearing latex gloves may
offer a better grip.
A CAUT/O_V.. Before replacing
your light bulb, disconnect the electrical
power to the hood at the main fuse or
circuit breaker panel.
Be sure to let file light cover and bulb cool
completely.
For your safeb,, do not touch a hot bulb
with bare hands or a damp cloth.
TO
remove:
[_ Turn the glass cover counterclockwise
until the glass cover clea_ the socket.
[_ Using gloves or a (h T cloth, remove
the bulb by pulling it straight out.
To replace:
S c ) c •
[y] U_e a new 12w(lt, 20-watt (maxmmm)
Halogen bulb for a (;-4 base.
Receptacle
/
orcloth _
Push the bulb straight into the
receptacle all the way.
Place the gl_kss cover onto the socket
and mrn clockwise undl secure.
For improved lighting, clean file glass
cover fiequently using a damp cloth.
This should be done when the hood
is complemly cool.
[_ Reconnect electrical power to
the hood.
[_ Using gloves or a (h T cloth, remove
the new bulb flom its packaging.
NOTE: Do not touch the new halogen bulb
with bare fingers. Touchingthe bulb with
bare fingers will significantlyreduce the
life of the bulb.
6