Accessories; Test Leads - Craftsman 161.210400 Owner's Manual

I.
2_
.
d
5_
IGNITION J
KIT
ACCESSORIES
FIGURE 3
BATTERY POST ADAPTER. Used in
electrical systems tests with i00 Amp
and 400 Amp shunts.
SIDE MOUNT ADAPTER. Used with
Battery Post Adapter on batteries with
side terminals.
JUMPER LEAD. Used in electrical sys-
tems tests.
ALTERNATER FIELD PLUG CONNECT-
OR. Used in "A" & "B" circuit alter-.
nator output tests.
DOMESTIC SPARK PLUG ADAPTER.
Used to make ignition cable tests.
4t
FOREIGN SPARK PLUG ADAPTER.
Used to make ignition cable tests.
.
G.M. DIAGNOSTIC CONNECTOR.
ADAPTER. Used to make tests on
G.M. cars equipped with the diag-
nostic connector.
PRIMA!RY COIL ADAPTER. Used to
provide easy hook-up on ignLtion sys-
tems with insulated call primary con-
necHons.
9_
H.E.i. ADPTER. Used to provide
Dwell connection on G.M.H.E.I.
systems.
................................................ ' .......................... _'_ ..................... Itrtrnlnrlrllllllrlrlll .................................................................................................
TEST LEADS
FIGURE 4
The plugs and sockets are pol-
arized to insure correct attach-
ment. The socket has a groove
on each top corner. The plug
has a mating ridge on the inside
of the top corners.
LEAD _ PANEL
PLUG k_ SOCKET
BLACK
RED
BLUE
POINTS, VOLTS, j _m,._
AND DWELL
................... _.,_,,_ _,_
AMPS ....
r* _"b' _WITH
'-'_ ': ::':'100/400 ....... AMP" ' _'SHUNT'" _-- I_€;
RPM
WHITE
_m,.. OHMS